Unisub Sublimation Blank MDF Coat Hanger - Straight Black Finish Edge

Videos

No videos for this product

Client Gallery

Product Instructions

Quick Summary - Click the button below for the full instructions with videos and stacking order.

Prepress: 20 Seconds
Time: 1 minute : 30 seconds
Temperature: 400°F (204°C)
Pressure: Medium

Heat Press Instructions:
1. Cover the bottom table of the press with a sheet of protective paper.
2. Place substrate face down on bottom table, cover with protective paper, and pre-press for 20 seconds. Do not skip this step. After cooling, dry any remaining moisture on the substrate.
3. Secure transfer to substrate using ProSpray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.

This product will hold up to 30 lbs when:
• Attached to a wall into a stud.
• Hung with #6 or #8 drywall anchors (nails won’t hold the weight).
• Maximum weight on any single coat hook does not exceed 15lbs.
• Children should never use this as a toy.

Application note: During pressing, it is normal for trapped moisture to escape through the substrate’s edge foil. Should the edge foil come loose and flake off after transfer, this is indicative of an excessive amount of moisture within the substrate. In this instance, you will need to prepress (and cool) your substrates twice for 30 seconds each, prior to transfer. If the problem persists, contact Condé for replacement plaques.

Additional Items Needed: Heat Tape
Recommended Paper: DyeTrans Multi-Purpose or TexPrint

PartnerNET Product Templates

Product templates can greatly streamline the design, printing, and pressing stages of production. To help our PartnerNET Members, we have created a selection of templates for this product that can be used for free. By using these templates, you can eliminate the need to guess and ensure that your work is consistent and accurate.

You are not signed in. Please log in.

Blog Posts

Reviews

Write review this product!
Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.

Your name

Your email (not displayed publicly)

Your review

Captcha   

Submit

Product Support

Downloads

Suggested Retail Price Range

To view the suggested retail pricing for this item, log in.

Read: The Ultimate Guide to Retail Pricing Sublimation Products