22 oz Sublimation Blank Ceramic Tankard

Videos

No videos for this product

Client Gallery

Explore what others are creating with sublimatable products from Condé! Our Client Galleries are an excellent source of inspiration to help you grow your Sublimation Business. Be sure to check back frequently as new images are submitted daily.

There are 10 images in our Client Image Galleries for this product.
Click here to view the images for this product family

Peeps!

Spring flowers and butterfly wine tumbler

Stainless Steel Wine Tumbler

Pet Contest - Julep Stainless Steel Polymer Tumbler

Peeps!

Wine tumbler

Wine tumbler

Peeps!

Product Instructions

Quick Summary - Click the button below for the full instructions with videos and stacking order.

Time: 17 minutes : 0 seconds
Temperature: 400°F (204°C)
Pressure: Medium

Heat Press Instructions:
1. Secure transfer to the stein using PROSPRAY.
2. Wrap the stein with protective paper. Portions of the stein that come into direct contact with the DYEWRAP will yellow. Take care to smooth any and all wrinkles.
3. Secure the DYEWRAP around the stein. Tighten DYEWRAP to finger tight, then give it two more turns using a common wrench.
4. Place into oven and set dwell time to time listed above.

Application notes: Be careful not to use too much pressure, it can wrinkle your transfer - use a protective cover sheet but do not reuse that sheet, it will have ink on it after one use.

Instructions for Using an Oven and SubliShrink

400° 15 Minutes

1. Preheat oven to 400°
2. Cut out template and tape it tightly to your mug
*Optional- if adding a handle design make sure that it is taped down securely.
3. Cut a slit about 2 inches from the bottom of the shrink wrap and slip the wrap over the mug with the handle out
4. Tape shrink wrap under handle to ensure that it will not separate when tightened with heat
5. Tuck excess SubliShink into the mug and evenly tighten the wrap by using the heat gun to apply hot air
6. Place in preheated oven for 15 minutes
7. Use caution to remove SubliShrink and paper from hot mug immediately
8. Allow mug to cool under a fan or using a Kool Plate®

***Oven time and temps vary. When you begin to see your image sublimate through the SubliShrink, it is time to remove from the oven.


Place the base of the stein in the oven closest to the heat source.

Be sure to wrap the entire area of the substrate with protective paper, there will be a discoloration of the substrate should the wrap come into contact.

Use a fan to cool ceramic mugs or the A6000 Kool Plate. Do not dunk mugs in water. Remove transfer after mug has cooled.

Remove any paper residue with a soft wet cloth or sponge.

Recommended Paper: DyeTrans Multi-Purpose or TexPrint

PartnerNET Product Templates

Product templates can greatly streamline the design, printing, and pressing stages of production. To help our PartnerNET Members, we have created a selection of templates for this product that can be used for free. By using these templates, you can eliminate the need to guess and ensure that your work is consistent and accurate.

You are not signed in. Please log in.

Blog Posts

Reviews

Write review this product!
Complete this form below and you'll be entered into our weekly prize draw to win a $25 Conde Account Credit! A lucky winner will be drawn randomly on Friday of each week and notified by email.

Your name

Your email (not displayed publicly)

Your review

Captcha   

Submit

Product Support

Downloads

Suggested Retail Price Range

To view the suggested retail pricing for this item, log in.

Read: The Ultimate Guide to Retail Pricing Sublimation Products