Skip to main content
Sublimation - Conde Systems - 27 Years Expert Experience
0 items in shopping cart

Tape: Loading the Deluxe Definite Tape Dispenser for 54200

Required Accessories

Heat Tape

Paper

N/A

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.


SECONDS

N/A
DEGREES

N/A
PRESSURE

Hover transfer under open heat press for 10 seconds to dry excess moisture.

The heat tape Conde sells currently (54148) is a little large for the Deluxe Definite Tape Dispenser. It is recommended you install a new roll of tape on the side slot and use it normally until it is the right size to fit on the dispense side, about 1/4" needs to be used.





With the dispenser paddle wheel facing away from you, squeeze the black lock wheels on the right side to insert new rolls. The left side is the dispense side. You can insert up to three 1/2" width tape rolls on the left side.

When the roll is inserted, put it "upside down" with the tape unreeling from the bottom and going underneath the paddle wheel.




Updated: May 6, 2016

© Copyright 2024 Condé Systems, Inc. All Rights Reserved.
About  |  Blog  |  Terms & Conditions  |  Privacy  |  Support  | Feedback