OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
| Substrate | SUBMET11W, SUBMET11SS |
|---|---|
| Temperature | 385°F (196°C) |
| Time (min:sec) | :40 |
| Pressure | Light |
| Additional | |
| Recommended Paper | DyeTrans Multi-Purpose or TexPrint |
| Heat Press Instructions |
Hover transfer under open heat press for 10 seconds to dry excess moisture. When applying images to both sides of substrate, it is recommended you press both sides at once.1. Cover the bottom table of the press with a sheet of protective paper. 2. Secure transfer to substrate using ProSpray. 3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. You may print both sides at once; just insert the item between two printed transfers and press. 4. Top with protective paper and press according to time, temperature, and pressure above. Application notes: When applying images to both sides of substrate, it is recommended you press both sides at once. Do not stack items while hot. Place separately on a table to cool. |